Ec declaration of conformity – Proface AGP3500 - 10.4 DIO HMI" User Manual
Page 9
9/10
Yoshihiro Yasumura
President of Pro-face Europe B.V.
Netherlands - 2132 LS Hoofddorp 2013-12
EC DECLARATION
OF CONFORMITY
For units intended to be used in potentially explosive atmosphere
(By way of the Explosive Atmospheres directive No. 94/9/EC)
WE :
Digital Electronics Corporation
8-2-52, Nanko-higashi
Suminoe-ku, Osaka, 559-0031 Japan
hereby declare that the units
TRADEMARK
: Pro-face
PRODUCT, TYPE
: Graphic Panels
MODELS
: GP series and ST series listed in certification INERIS
07ATEX3003X and Additions 01/02
which, through their design and construction, meet the requirements of the
European Directives and applicable standards:
It is important that the safety component is subject to correct installation,
maintenance and use conforming to its intended purpose, to the applicable
regulations and standards, to the supplier's instructions and to standard
practices.
Marking of units:
II 3 G D
Additional marking:
Ex nA nC IIC or IIB (*) T3/T4 (*) Gc
Ex tc IIIB T135 or 200°C Dc IP64
Tamb. 0°C to +50°C
EC type examination certification:
INERIS 07ATEX3003X and Additions 01/02
Delivered by:
INERIS
ParcTechnologique Alata
F- 60055 Verneuil en Halatte
(*) according to models
Directive(s) :
Standard(s) :
- ATEX directive
94/9/CE
- EN 60079-0
- EN 60079-15
- EN 60079-31