Proface LT4300M - 5.7 Modular HMI + Control" - Manual (Page 17)

LT-4201TM/4301TM Installation Guide
17
English
The figure shows the assembly with the Panel spacer:
(1) Display module
(2) Panel
(3) Spacer
(4) Display installation nut
(5) Anti-rotation tee
Installation of the LT Unit
In order to correctly run an application on the LT, both the display module and the rear
module must be connected.
WARNING
EXPLOSION HAZARD
 Do not connect or disconnect while circuit is live.
 Potential electrostatic charging hazard: wipe the front panel of the terminal with a
damp cloth before turning ON.
 Refer to Hardware Manual for instructions
Failure to follow these instructions can result in death, serious injury, or equipment
damage.