Proface PS4800 - 19 Panel PC" - Manual (Page 103)

PS-4600 Series User Manual
103
Exit Menu
Exit Menu
The table shows the Exit menu setting options:
BIOS Default Settings
The CMOS profile switches, located on the front side of the unit near the LEDs, are
used to load pre-defined BIOS profile settings, which are based on the position of
the switches.
BIOS Setting Description Setting Op-
tions Effect
Save Changes
and Exit BIOS setup is closed with this item.
Changes made are saved in CMOS after
confirmation. Yes/No -
Discard Chang-
es and Exit With this item you can close BIOS setup
without saving the changes modem. Yes/No -
Save Changes
and Reset BIOS setup is closed with this item.
Changes made are saved in CMOS after
confirmation, and the system is reboot-
ed. Yes/No -
Save changes
and reset BIOS setup is closed with this item.
Changes made are saved in CMOS after
confirmation, and the system is reboot-
ed. Yes/No -
Discard Chang-
es and Reset With this item you can close BIOS setup
without saving the changes made. The
system is then rebooted. Yes/No -
Save Changes Changes made are saved in CMOS after
confirmation. Yes/No -
Discard Chang-
es You can no longer remember the event
where the settings are made and you can
reset (as long as they haven’t been
saved). Yes/No -
Restore De-
faults This option restores the BIOS default val-
ues. Yes/No -