Ports 1~16 status leds, Fiber module leds – Atlantis Land 10/100Mbps User Manual
Page 20
14
Ports 1~16 Status LEDs
Link/ACT
On
: When the Link/ACT LED lights on, the respective port is
successfully connected to an Ethernet network.
Blinking
: When the Link/ACT LED is blinking, the port is
transmitting or receiving data on the Ethernet network.
Off :
No
link.
100Mbps
On
: When the 100Mbps LED lights on, the respective port is
connected to a 100Mbps Fast Ethernet network.
Off
: When the respective port is connected to a 10Mbps Ethernet
network
Fiber Module LEDs
FX Link/ACT
On
: When the fiber module is installed and connected to an
Ethernet network, the FX Link/ACT LED lights on.
Blinking : When the FX Link/ACT LED is blinking, the fiber module
is transmitting or receiving data on an Ethernet network.
Off :
No
link.
FDX
On
: When the FDX LED lights on, the fiber port is in full duplex
mode.
Off
: When the green light is off, the fiber port is in half duplex
mode.