Connectors and jumpers, Connectors and jumpers -2 – Acer PCI to Ultra SCSI RAID Controllers DAC960PG User Manual
Page 22
Advertising
Connectors and Jumpers
3-2
DAC960PG and DAC960PJ Installation
Connectors and Jumpers
Up to three Ultra SCSI channels are supported on the DAC960PG and
DAC960PJ. The SCSI connector locations are shown in Figure 3-1.
Be sure that the Jumper JP6 has a jumper installed (see Figure 3-1 and
Table 3-1).
Figure 3-1. Full-length Controller Component Layout
Table 3-1. Full-length Controller Jumper and Connector Descriptions
Component
Description
Default Setting
JP4
Connector for optional front panel LED harness
–
JP5
Serial Port Connector
–
JP6
Reserved
Installed
J5
Battery Backup connector – If a BBU is not
installed, a loopback plug must be installed in
this socket.
Installed at
factory
Advertising