AEG L 98699 FL - Manual (Page 11)

Rinse hold
1) Only available for Spin/Drain programme.
J
The default temperature of the programme.
Cold wash
STEAM BUTTON 4
Touch button 4 to set the steam level.
This is possible only with programmes
where the steam function is available.
The duration of the steam phase
changes accordingly to your selection.
MEMORY BUTTONS 5
Touch one of the buttons 5 to memo-
rise a programme or to set a memo-
rised programme.
Memorise a programme
1. Press button
1 to activate the ap-
pliance.
2. Turn the programme knob (
2 ) to
your favourite programme.
3. If it is necessary, set one or more
functions.
4. Touch and hold one of the buttons
5 for some seconds. The buzzer
sounds and the display shows that
the programme is saved. .
Set a memorised programme
1. Touch the button where you memo-
rised the programme you want to
set.
2. The programme indicator comes on
and the display shows all the infor-
mation.
To cancel a memorised pro-
gramme you can only memorise
a new programme.
START/PAUSE BUTTON 6
Touch button 6 to start or interrupt a
programme.
DELAY START BUTTON 7
Touch button 7 to delay the start of a
programme from 30 minutes to 20
hours.
TIME SAVE BUTTON 8
Touch button 8 to decrease the pro-
gramme time.
You can select:
SHORTENED DURATION
To wash items with daily soil.
EXTRA QUICK
To wash quickly items with almost no
soil.
Some programmes accept only one of
these functions.
EXTRA RINSE BUTTON 9
Touch button 9 to add rinsing phases
to a programme.
Use this function for persons allergic to
detergents and in areas where the wa-
ter is soft.
STAINS, PREWASH AND SOAK
BUTTON
10
Touch button 10 to set one of the these
functions:
STAINS
Use this function for laundry with hard
stains to remove.
When you set this function, put the
stain remover into compartment
.
The programme duration in-
creases.
This function is not available
with a temperature lower than
40° C.
ENGLISH 11