Yokogawa FD20 Immersion Fitting - Manual (Page 10)

IM 12B6K2-01E-E
10
10 cm
colour
marker
colour
marker
screen
blue
core
red
10 cm
colour
marker
colour
marker
outer
screening
white
core red
inner
screening
blue
Cable nut Cable nut
10 cm
colour
marker
colour
marker
screen
blue
core
red
10 cm
colour
marker
colour
marker
outer
screening
white
core red
inner
screening
blue
Cable nut Cable nut
COAX TRIAX
Type WU20D-PC Type WU20D-LT
Fig. 3-3. Mounting a cable and sensor
in a 1-hole fitting
O-rings
(11x3)
Electrode cable model WU20
Attention:
Ensure that the cable has slack remaining
in the fitting so that sensor replacement is
simplified. To prevent damage of the O-rings
the nut and glands must be screwed
HAND-TIGHT to the fitting. Prepare the
sensor to be used in accordance with the
directions for use. After that mounting can
be made as shown in fig. 3-3.
Attention:
To prevent fouling of the contacts, it is
recommended to screw the electrode
cable on the electrode as soon as possible.
Ensure that there is no moisture or dust in
the connection sensor-cable.