Yokogawa FD30 Immersion Adapter - Manual (Page 3)

IM 12J6K4-E-E
4
IM 12J6K4-E-E
5
All defective goods need to be sent to the service of the sales organization for repair or
replacement and the returned material should be accompanied by a letter of transmittal,
which should include the following information:
• Part number, Model code and Serial number
• Date and number of sales order
• Length of time of service and type of service
• Description of the faulty operation of the device and the circumstances of the failure
• Pressure, temperature, process composition and all other process conditions or
environmental circumstances which are related to the installation and possibly failure of the
device
• Statement as to whether warranty or non-warranty service is requested
• Complete shipping and billing instructions for return of material and name, phone number
of contact person that can be approached for further information.
The returned goods that have been in contact with process fluids must be detoxified and
disinfected prior to shipment for the health and safety of our employees. Material Safety
Data sheets must be included for all components of the processes in which the sensors/
fittings have been used. The shipping address where to the goods have to be returned is
specified on the original sales order or on the back page of this manual.
4. General specifications
4.1 Model FD30 Immersion Fitting
Wetted materials
- Body & flange : Polyvinylchloride (PVC)
- O-rings : Silicone rubber
- Blanking plug : Ryton R4 (remove before use!)
- Conductive bushing : Brass
Temperature
- Minimum : -10 °C
- Maximum : +50 °C
Pressure : 2 bar max.
Immersion length : 0.5 to 2.0 m (10 cm steps) When ordered as a
subassembly (pipe length 00), a tube with PVC
cement will be delivered with the holder
Weight
- Without flange : 1.35 kg + 0.2 kg per 0.5 meter
- With flange : 0.5 kg extra
Options
- Sensor/cable : See DO30G
- Flexible conduit : PVC and Nylon
Option /PH5 : 5 meter protection hose
Option /PH10 : 10 meter protection hose
- Jet cleaner (Option /JC) : Materials: PVC, Nylon, PVDF and PTFE
Temperature: as FD30
Pressure: as FD30
Immersion length: nominal + 4 cm
- Mounting set (Option /MS1) : Material; Galvanized steel
Model and Suffix code
Immersion Fitting
Model Suffix Option Description
FD30V27 Immersion Fitting PVC
Immersion -00 Pipe supplied by user
length -xx Between 0.5 and 2.0
(in steps of 0.1m) Example: 06 = 0.6 m
Mounting -FN No flange
flange -F1 DIN DN50 PN10
-F2 ANSI 2” 150 lbs
*A Style A
Protection hose /PH5 5 meter
/PH10 10 mtr
Jet Cleaner /JC *
Mounting set /MS1 *
* Not available with flanged versions.
4.2 Model PB30 Floating Ball Fitting
Wetted materials : High impact polystyrene, PVC & Brass
Temperature : 0-40 °C
Mounting bracket : Galvanized steel, for rail, or surface mounting
Sensor/cable : See DO30G
Shipping details
- Weight : 12.5 kg Approx.
- Package size : 490 x 320 x 340 mm
- Main support arm : 2.5 m
Model and Suffix Codes
Floating Ball
Model Suffix Code Description
PB30 Floating Ball Fitting
Pipe length -00 Pipe supplied by user
-25 2.5 meter
Sensor type -SNN No sensor
Cable length -00 No cable