Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 7)

IM CX1000-S33E 5
5.DAQSTANDARD PC Software
The items that related to CP operators can be set beside the standard DAQSTADARD functions and
special functions that are described in IM CX1000-S33E.
5.1 Hardware Setting
System configuration
For the case of configuring new setting, set the system configuration according to product
specification.
[Product specification]
-Type, -channel, loop, -Ver3.02 or later*1, -Math Func., -Serial, -Media, -Alarm Relay, -Option,
-Program, -Custom Spec.*2
*1: Check radio button of Ver3.02 or later for this DAQSTANDARD setting
*2: Check radio button of /S35
Figure 2 System configuration