Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 12)

IM CX2000-S30E 10
3.4 Specify Message Number and Message Write with Internal
Switch
Press the soft keys in the following sequence:
Press the “MENU” key (Control mode) > “FUNC” key for a few seconds (Setup Mode) >
#10 “Control” soft key > #2 “DI/DO/SW-registration, AUX (Alarm mode…)” soft key.
1. Select a soft key corresponding to “INT-SW1” or “INT-SW2”or “INT-SW3”.
2. Define Message number you wish to use.
3. 1-240 messages can be selected
Figure 3.4 Message registration