Yokogawa µR20000 User Manual
Page 7
Advertising
6
IM 04P02B01-51E
Connections
1.
Check that the power switch to the instrument is turned OFF.
2.
Connect the plug on the accessory power cord to the power supply connector
on the rear panel.
3.
Ensure that the power outlet to be used meets the conditions on the previous
page and that the voltage of the power supply is within the maximum voltage
rating of the power cord, then connect the other end of the power cord to the
power supply outlet.
The AC outlet must be of a three-prong type with a protective earth ground
terminal.
Installation and Connecting the Power Supply
Advertising