Waste pump impeller replacement – MAHLE RTI MCX-2 (Rev A) User Manual
Page 17
Advertising
Page 16
Cover Plate
Gasket
Impeller
Pump
Screw
Housing
WASTE PUMP IMPELLER REPLACEMENT
The waste pump impeller may require periodic replacement. The concentration of
impurities in recovered old coolant affects the life of the pump impeller. Changing the
impeller is quick and easy as follows:
1.
Remove Hose Holder on rear of unit to access the end of the Waste Pump.
2.
Remove 4 screws.
3.
Remove cover plate, gasket and worn impeller.
4.
Coat new impeller with Vaseline
®
petroleum jelly.
5.
Align flats and press impeller onto shaft.
6.
Attach new gasket and cover plate.
7.
Replace Hose Holder.
Impeller & Gasket - Part Number 028-80210-00
Advertising