Stuart Turner Monsoon Extra 2.6 bar PS - Manual (Page 6)

- 6 -
Cont ...
2 LOCATION
2.26 The cold water supply: The supply must be AIR FREE and have a
DEDICATED CONNECTION to the tank which should be via a tank connector,
positioned at a slightly lower level (25 mm minimum) than the feed pipe to the hot
water cylinder.
Do not connect to the mains.
2.27 Location: The pump must, for optimum performance, be sited as close as
possible to and never more than 4 metres from the HOT WATER cylinder. The
pump should always be sited BELOW the HOT WATER take-off from the cylinder.
Fig. 2
Cold
water
Hot water
Unvented hot
water cylinder
Static inlet pressure Min. 1 m Max. 10 m
Static outlet pressure Max. 13 m