Stuart Turner PH 35 TS - Manual (Page 3)

- 3 -
Cont ...
PRODUCT DESCRIPTION
Motor:
Induction type, totally enclosed fan ventilated cooling*, continuously rated*, class ‘F’
insulation. Motors comply with IEC34-1. Single phase versions incorporate a permanent
capacitor and integral auto resetting thermal overload protection.
The standard range of motors are suitable for a supply of 230V, 1 phase, 50Hz.
Optional motors are available on certain models to suit various voltages and frequencies
(see technical specification for details).
*Variations of rating and enclosure details can be found in the technical specification
section.
Pump
All models are close coupled to motor.
PH 35 TS & PH 45 TS are of single stage, peripheral design, with vertical suction and
discharge ports.
PH 35 ES & PH 45 ES are of single stage, end suction, peripheral design.
Standard pump materials of construction of major wetted parts are as follows: -
* With footvalve fitted.
**Note: Max working pressure is the maximum pressure that can be applied to the
pump internal casing under any installation conditions.
Other seal material options are available on certain models.
LIMITS OF APPLICATION
Model Body Impeller Shaft Mechanical Seal
ALL Brass Brass Stainless Steel Nitril/Carbon
Ceramic/Stainless Steel
Model Supply
Max.
Liquid
Temp. o C
Min.
Liquid
Temp. o C
Max.
Ambient
Air Temp
o C
Max.
Suction
Lift (m)
Max. Head
(Pump
Closed
Valve) (m)
Max. Viscosity
**Max.
Working
Pressure
kPa (bar)
Max.
Inlet
Head
(m)
Max. No.
Starts/h (Redwood No. 1
Scale)
Centistokes
PH 35 TS 230/1/50 80 4 40 4.6* 30.7 50 9.5 600 (6) 30 60
PH 45 TS 230/1/50 80 4 40 4.6* 41.6 50 9.5 600 (6) 19 60
PH 35 ES 230/1/50 80 4 40 4.6* 29.8 50 9.5 600 (6) 31 60
PH 45 ES 230/1/50 80 4 40 4.6* 42.0 50 9.5 600 (6) 19 60