Stuart Turner Techflo TP 60TNH - Manual (Page 22)

- 22 -
Cont ...

IMPORTANT – Ensure there is no contact with any of the internal parts of
the terminal box.
 Briefly reconnect the mains power supply to the pump – the ‘power on’ light
should illuminate if the pump has been correctly wired.
 Isolate the mains electrical power supply from the pump.
 Re fit the terminal box lid ensuring no cables are trapped.
 Re fit the four terminal box lid retaining screws, tighten to 0.8 Nm.
‘Power on’ light
Terminal box lid
Retaining screws x 4
Fig. 18 Wiring removed for clarity