PreSonus FireStudio Project - Manual (Page 24)

GETTING STARTED
21 | PreSonus 2009
2.3.2 Using Multiple FireStudio Projects with the HP60
This hookup diagram shows two FireStudio Projects daisy-chained together. One FireStudio Project is
dedicated to the microphones on the drum set. All other instruments are connected to the second FireStudio
Project. The Main outputs of each unit are then connected to the two Mix inputs on an HP60. The General
Purpose outputs are shown as connected to the External input on each channel of the HP60. In this way,
each musician can create a custom blend of the drum and instrument mixes, adding or subtracting the drum
mix as needed, and can turn themselves up in the mix. Only the drummer and keyboardist would have a stereo
signal on their External input in this example. The rest of the members of the band would need to enable the
Mono switch on their HP60 channel.