PreSonus FireStudio Mobile - Manual (Page 45)

O
ver
view
G
etting
Star
ted
C
ascading Units
Technical Inf
or
ma
tion
CONTROLS & CONNECTIONS 3 Owner’s Manual
45
C
on
tr
ols and
C
onnec
tions
Software 3.1
Master Output Section
Master Output Fader Changes the Selected Output’s Audio Level.
Move the Master Fader up and down to increase
and decrease the level of the selected output’s
audio.
The amount of boost or attenuation, measured in
decibels, is displayed below the Channel Fader. The
range is from –
∞
to 0 dB.
Two virtual LED meters to the right of the Master
Fader display the pre-fader levels of the audio
signal.
The peak value in dBFS of the channel’s audio
is displayed directly above the Master Output’s
virtual LED meter.
NOTE: If the peak values display “CLIP,” then your
mixer channels and/or your DAW playback levels
should be reduced. The clip indicators clear when the
mouse pointer hovers over them.
Master Mute and Solo Clear
Clears All Active Channel Mutes or Solos.
The Master Mute and Solo Clear buttons are only
active when a channel’s mute or solo button is
active.