PreSonus StudioLive 16.0.2 - Manual (Page 3)

Table of Contents
1 Overview — 1
1.1 Introduction — 1
1.2 About This Manual — 1
1.3 Summary of StudioLive 16.0.2
Hardware Features — 2
1.4 What is in the Box — 3
2 Getting Started — 4
2.1 Level Setting Procedure — 4
3 Hookup — 9
3.1 Rear-Panel Connections — 9
3.2 Typical Live Band Hookup
Diagram — 12
3.3 Typical Recording Hookup
Diagram — 13
4 Controls — 14
4.1 The Fat Channel — 14
4.1.1 Select Buttons, Meters and
the Fat Channel — 14
4.1.2 Fat Channel
Processing Guide — 15
4.1.3 Fat Channel: Dynamics
Processing and EQ — 15
4.1.4 Fat Channel Panning and
Stereo Link — 20
4.1.5 Fat Channel: Digital Out — 20
4.1.6 Copying Fat Channel
Settings — 21
4.1.7 Loading Fat Channel
Presets — 21
4.1.8 Saving Fat Channel
Presets — 22
4.1.9 Channel Presets Library — 23
4.2 Metering — 24
4.2.1 StudioLive Metering
Controls — 24
4.3 Input Channel Strip — 25
4.3.1 Input Channel Controls — 25
4.4 Aux and FX Buses — 26
4.4.1 Analog Aux Bus Controls — 26
4.4.2 Internal FX Bus Controls — 27
4.4.3 Aux and FX Bus Channel
Sends — 27
4.4.4 Creating Monitor Mixes — 29
4.4.5 Creating Internal FX Mixes — 30
4.5 MultiModes — 31
4.5.1 MultiMode Controls and the
Buttons that Love Them — 31
4.6 Main Output Bus — 32
4.7 Talkback System — 32
4.8 Solo Bus — 33
4.8.1 Solo Bus Controls — 33
4.8.2 Using the Solo Bus for
Monitoring — 34
4.8.3 Using Solo in Place (SIP) to
Set Up a Mix — 35
4.9 Monitor Bus — 36
5 Digital Effects |
Master Control — 38
5.1 The Digital FX (Effects) Menu — 38
5.1.1 Creating FX Presets — 39
5.1.2 Reverb and its Parameters — 40
5.1.3 Delay and its Parameters — 41
5.1.4 Digital Effects Preset
Library — 42
5.1.5 Digital Effects Types — 43
5.2 Scenes — 44
5.2.1 S1: Zero Out (Board Reset) — 44
5.2.2 Creating a Scene — 45
5.2.3 Scene Recall — 45
5.2.4 Fader Locate — 47
5.2.5 AutoStore — 47