PreSonus StudioLive Remote - Manual (Page 23)

19
Addendum for
StudioLive Mixers
Ov
er
view
StudioLiv
e
Remot
e
QMix
Tr
oubleshooting
Universal Control 1.6 with VSL 2
Univ
ersal
Con
trol and VSL
Loading an FX Preset
To load an FX preset, select it from the Browser window and drag it over
any part of the desired FX bus in the Master section of the Overview tab.
Once it is loaded, you can use the FX Type menu to change the effect and
create new presets.
Note: At this time, VSL does not transfer the name of the preset to the
StudioLive. All FX presets loaded from within VSL will be labeled “Natural” in
the FX menu on your StudioLive.
Loading a GEQ Preset
To load a graphic EQ preset, select it from the Browser window and drag it
over any part of the focused graphic EQ. Graphic EQ presets can be
loaded on the Overview tab or the GEQ tab. Once a preset is loaded, you
can use the sliders in VSL, or the encoders on the StudioLive, to make
adjustments. Note that you must be in the GEQ menu page for the
graphic EQ you wish to control in order to use the encoders on your
StudioLive to control each graphic EQ in VSL. See the next section for
details.
VSL: Virtual StudioLive 2.5