PreSonus Sceptre - Manual (Page 4)

1.0 Overview
1.2 Summary of Sceptre S6/S8 Features
Sceptre ™ S6 and S8
Owner’s Manual
2
1.2 Summary of Sceptre S6/S8 Features
• Temporal Equalization ™ by Fulcrum Acoustic
combines 32-bit floating-point DSP with coaxial cone
woofer and horn-loaded compression tweeter
• 2x90W, Class D amplifiers optimized
for the woofer and tweeter
• Front-ported cabinet extends and
smoothes out bass response
• 2 balanced inputs: XLR and ¼” TRS
• Input-level control with 10 dB of gain above unity
• High-frequency driver adjust (linear, +1
dB, -1.5 dB, -4 dB) above 2 kHz
• High-pass filter switch (linear, 60 Hz, 80 Hz,
100 Hz) with -24 dB/octave slope
• Acoustic Space switch (linear, -1.5 dB, -3 dB, -6
dB) to compensate for bass boost near a wall
1.3 What is in the Box
In addition to this manual, your Sceptre S6/
S8 package contains the following:
• (1) PreSonus Sceptre S6 or S8 active studio monitor
• (1) IEC power cable
1.3.1 Special Handling Instructions
The horn on your Sceptre S6/S8 is very delicate and should
be handled with extreme care. Do not use the horn to turn
or adjust your Sceptre S6/S8 or as a handgrip by which to
pick it up. Doing so will damage your Sceptre monitor and
will require it to be repaired by PreSonus. Damage caused
by mishandling may not be covered by your warranty.