PreSonus DigiMax FS - Manual (Page 7)

OVERVIEW
BNC In and Out. The BNC input allows an external clock to be connected to the
DigiMax FS as a slave. The BNC output allows the DigiMax FS to connect to any BNC
input as a master clock. Note that it is not recommended to split the BNC output to clock
to multiple devices. It is recommended to daisy-chain multiple DigiMax FS’s or other
digital devices.
75 ohm Terminate. This switch allows you to terminate the word clock signal when
daisy-chaining multiple digital devices. Press this button on the unit that is the final unit in
the chain.
7