Nx242, Geo vertical arrays – Nexo GEO S8 User Manual

Page 11

Advertising
background image

NX242 DIGITAL TDCONTROLLER SETTINGS

P.11

NX242

D

IGITAL

TD

CONTROLLER SETTINGS

The GEO S8 Series cabinets will not perform correctly without the NX242 TDcontroller. Sound quality and
reliability are totally dependent on the correct use of the NX242 TDcontroller, in accordance with the
instructions provided in this manual and in the NX242 User Manual.

All manuals & associated technical notes must be read before set-up. Please contact your NEXO agent for
any literature you may need. The NX242 Digital TDcontroller is able to drive the entire current NEXO range
(GEO, PS & Alpha series, CD12 subs). The following GEO set-ups are examples, for a complete and updated
list please refer to the documentation describing the NX-LOAD.

GEO Vertical Arrays

Input/Output Assignments:

GEO S8 Series Wideband Configurations (No Sub)

Input A

Input B

Left Right

Output 4 HF

Output 3 HF

Output 2 LF

Output 1 Sub

Left Right No Signal

No Signal

S805 4-8 boxes No Sub

Stereo Setup. Input A (Left) & B (right). Output 3 (left) and 4 (right). No signal on output 1 &2.

Configure GEO S805 Wideband for 4-8 boxes.

S805 9-16 boxes No Sub

Stereo Setup. Input A (Left) & B (right). Output 3 (left) and 4 (right). No signal on output 1 &2.

Configure GEO S805 Wideband for 9-12 boxes.

Input/Output Assignments: GEO S8 + CD12 Configurations

Input A

Input B

Mono

No Signal

Output 4 HF

Output 3 HF

Output 2 LF

Output 1 Sub

No Signal

GEO S8

CD12 Front Driver

CD12 Back Driver

S805 4-8 boxes CD12 Ground

Mono Setup. Input A. Output 1 (back driver of the CD12), Output 2 (front driver of the CD12), Output 3 (GEO),
no signal on Output 4.

Configure GEO S805 (4-8 boxes) with CD12.

S805 9-6 boxes CD12 Ground

Mono Setup. Input A. Output 1 (back driver of the CD12), Output 2 (front driver of the CD12), Output 3 (GEO),
no signal on Output 4.

Configure GEO S805 (9-16 boxes) with CD12.

S805 4-8 boxes CD12 Flown

Mono Setup. Input A. Output 1 (back driver of the CD12), Output 2 (front driver of the CD12), Output 3 (GEO),
no signal on Output 4.

Configure GEO S805 (4-8 boxes) with CD12 flown.

Advertising
This manual is related to the following products: