NcSTAR APRLSMG - Manual

GREEN LASER WITH WEAVER STYLE MOUNT
 This Green Laser is designed to mount directly to your firearm for quick and easy target
acquisition. Use of the laser will not replace the use of other sighting devices in regards
to accuracy, but it will certainly aid in locating your target with ease.
 This Green Laser mounts easily to almost any Picatinny or Weaver style base in any
configuration that you choose.
 Included in the package are two types of switches: a standard momentary On/Off
button (5) , and a remote coil pressure switch (7). Also included is a specially designed
Weaver style mount (1), two different Allen wrenches (9), and a CR123A battery.
 Always be sure that the unit is off when not in use to preserve battery life.
 DANGER: AVOID DIRECT EYE EXPOSURE TO LASER BEAM. LASER
RADIATION IS EMITTED FROM THE APPERTURE.
 If you are not sure about any of the procedures in this manual, always seek
the help of a qualified professional to avoid damage to your Green Laser and
your firearm.
INSTALLING THE BATTERY:
Your new Green Laser uses a single 3 volt lithium battery (CR123A type). Always use a CR123A battery type for
the best performance and to avoid damage to the laser. To install the battery, simply remove the
rear threaded
coupling (6 & 5) by turning it counter clockwise [Figure 1]. Next, place the battery into the battery housing (3)
with the positive side ( + ) of the battery facing out. Turn the threaded coupling with the momentary On/Off
button insert clockwise back onto the rear of the laser tube body.
Turning the threaded coupling ALL the way in will turn the laser ON full time. Backing the threaded coupling a
few turns will then turn the laser OFF. Pushing the momentary button IN will turn ON the laser until you release
the button, releasing the button will turn the laser OFF.