ReadyLIFT Dodge Ram MEGA CAB, 2006-2013, 4WD Only - 8 LUG - 2.0 T6 Billet" User Manual
Page 4
Advertising
Then reconnect lower shock bolt and tighten the
upper shock mounting bracket. Reinstall wheels/
tires, lower to ground and torque. Reconnect
lower sway bar endlinks and test drive. Recheck
all work performed and have vehicle aligned.
www.ReadyLIFT.com
Phone (702)410-2300
Installation Instructions (66-1090 & T6-1090)
Next, remove upper rubber spring isolator.
Then remove shock tower nuts and retaining plate.
Note: This step shows
T6 Billet only
spacer assembly.
Install spring spacer over shock and into factory position.
Install spring spacer into frame pocket w/provided hardware.
Reinstall OE rubber spring isolator onto spacer.
Reinstall spring back into position and raise axle.
Advertising
This manual is related to the following products: