Bill of materials, Description – ReadyLIFT Ford F350 Super Duty 2WD 2.0 Leveling Kit - 1999-UP" User Manual

Page 3

Advertising
background image

www.ReadyLIFT.com - Phone: (800) 549-4620

Installation Instructions 66-2299

3

The Bill of Materials represents the component contents of this kit. All hardware is of the 
highest grade and the components are manufactured to exacting specifications for a 
trouble free installation.  Use the attached torque specifications chart when final tighten‐
ing of the nut and bolts are done.  

Bill of Materials

Description 

Qty 

Front Coil Spring Spacer 

Extender Studs 

Stud Spacers 1.275 OD x .772 ID x .350 Thick 

Place the vehicle on level ground.

Lift the vehicle off ground and remove the front tires.

Unbolt the sway bar on both sides of vehicle.

Remove the bolts and twist the sway bar out of the way.

Note: Some trucks will require new alignment cams/caster camber bushing in order to 
set the alignment properly. Your technician will inform you if needed. 

Advertising
This manual is related to the following products: