ReadyLIFT Jeep Wrangler JK 2007-2014, Adj. Lift 1.0-2.0"" User Manual
Page 4
Advertising
www.ReadyLIFT.com
Phone (702)410-2300
Installation Instructions (66-6095,
T6-6091 & T6-6092
)
Remove the upper spring isolator to expose mounting hole
T6-6091 & T6-6092
spring spacer kit w/mounting hardware
Attach spring spacer kit with provided hardware
Tighten bolt and reinstall rubber isolator as shown
Reinstall coil spring in vehicle and raise axle
Reattach lower shock mount and tighten
Reconnect lower swaybar endlinks and trac bar bolt
Tighten transfer case skid plate bolts, reinstall wheels
Bolt faces up passing through hole in frame
Advertising
This manual is related to the following products: