ReadyLIFT GMC Denali 1500 SST Lift Kit, 2000-2006, 2WD & 4WD - 2.5F/1.0"R" - Manual (Page 3)

www.ReadyLIFT.com
Phone (702)410-2300
Installation Instructions (69-3005)
Note: This tool/equivalent is required to replace torsion keys Raise and support vehicle on jack stands at the frame
Locate and remove torsion bar adjusting bolts Disconnect lower shock hardware.
Install torsion bar loading tool and run torsion key up Remove torsion key adjusting block from cross-member
Unload torsion key and tool. Then slide torsion bar forward Note key clocking position. Torsion key can now be removed