ReadyLIFT Z-71 Off Road GMC Sierra 1500 SST Lift Kit, 2014-UP 4WD, 2.25F/1.75"R w/ Uniball Control Arms" User Manual
Page 8
Advertising
www.ReadyLIFT.com - Phone: (800) 549-4620
Installation Instructions 69-3447
8
Revised Feb-2014
36.
35.
Remove the standard nut, replace it with a c-lock nut and tighten.
Insert the pin into the lower misalignment spacer.
Lock-tite the upper misalignment spacer and install.
Tighten down the misalignment spacers and install the cap.
Re-attach the tie rod and torque.
Re-attach brake calipers & torque to 145ft lbs.
Make sure the cap fits nice and tight.
You may need to put a small amount of
grease on the o-ring of the cap to help pre-
vent the o-ring from rolling and binding up. A
trick also is to twist the cap while applying
pressure to achieve a nice and snug fit.
34-6.
34-5.
34-4.
34-3.
34-7. 34-8.
Advertising
This manual is related to the following products: