Bill of materials – ReadyLIFT Z-71 Off Road GMC Sierra 1500 SST Lift Kit, 2014-UP, 4WD, 2.25F/1.75"R w/ Tubular Control Arms" User Manual
Page 3
www.ReadyLIFT.com - Phone: (800) 549-4620
Installation Instructions 69-3415
3
Revised FEB-2014
The Bill of Materials represents the component contents of this kit. All hardware is of the highest grade
and the components are manufactured to exacting specifications for a trouble free installation. Use the
attached torque specifications chart when final tightening of the nut and bolts are done.
Bill of Materials
Place vehicle on level ground.
Raise vehicle and support vehicle to perform work.
Disconnect battery connections.
Remove plastic air dam.
Description
Qty
Tubular Upper Control Arms
2
M6 Flat Washer (UCA)
2
M6 Nyloc Nut (UCA)
2
UCA Bushing Kit w/Washer & Grease
1
Aluminum Upper Strut Extension
2
Aluminum Lower Strut Extension
2
M10‐1.25 Serrated Flange Nuts
6
M10 Flat Washer
8
M10‐1.50 Stover Nut
4
Diff Drop Spacer Front .955" Tall
2
Diff Drop Spacer Rear .750" Tall
2
M12‐1.25 x 120mm
4
Description
Qty
M12‐1.25 Stover Nut
4
M12 Washers
8
Front Differential Skid Plate
1
3" Block and U‐bolt Kit
1
Rear Shock Extension
2
M14‐2.0 x 75mm Hex Head Bolt 10.9
2
M14‐2.0 C‐Lock Nut
2
M14 Washers
4
8" Zip Ties
4
M6‐1.25x20mm Skid Plate Bolt
1
M6‐1.25 Nut
1
Skid Plate Washer Large OD 7mm ID
2
2.
1.
4.
3.