ReadyLIFT Z-71 GMC Sierra 1500 SST Lift Kit, 2007-2013, 4WD, 2.25F/1.75"R w/ Tubular Control Arms" - Manual (Page 8)

www.ReadyLIFT.com - Phone: (800) 549-4620
Installation Instructions 69-3487
8
Revised Feb-2014
Re-install the rear cross member as original. Install upper control arms removing the plastic alignment cams.
Place the new strut extension spacer onto the strut. Install the strut with top spacer. Do not tighten yet.
**See insert for a-arm assembly**
38. 37.
40.
Install the lower strut spacer using factory hardware and torque. Once the lower is tightened, torque the top nuts.
Raise spindle, attach upper ball joint, tighten, & insert cotter pin. Connect outer tie rod end and sway bar end links and tighten.
41.
43.
42.
44.
39.
Reinstall OEM
hardware
without the
plastic cam
locks
into is
original location
noting original
direction of
cam bolts and
marks done
when you re-
moved them.