ReadyLIFT GMC Sierra 1500 SST Lift Kit, 2007-2013, 4WD, 4.0F/1.75"R" User Manual
Page 11
Advertising
Reinstall wheels/tires and lower to the
ground. Recheck all work performed, check
for proper clearance at full turn and while in
reverse. Torque all hardware to spec. Test
drive and re-torque u-bolts and wheels. Have
vehicle aligned.
www.ReadyLIFT.com
Phone (702)410-2300
Installation Instructions (69-3285,
69-3295
, 69-3485,
69-3495
)
Mark center of bump stop pad and drill 11/32 hole
Use self-tapping bolt and attach bump stop extension
Place Upper coil spacer nut plate above coil housing
Attach coil spring spacer to nut plate and tighten
Reinstall isolators and coil springs and raise axle
Reinstall shocks with extensions as shown and tighten
Install new longer sway bar end links and tighten
Advertising
This manual is related to the following products: