ReadyLIFT GMC Sierra Denali 2500HD 3500HD 4.0F/1.0"R SST Lift Kit, 2011-2014, 2WD & 4WD" User Manual

Page 7

Advertising
background image






www.ReadyLIFT.com

Phone (702)410-2300

Installation Instructions (69-3411 & 69-3412)

Properly support rear axle and disconnect lower shock mount

Unhook ABS wire from axle to prevent damage

Loosen and remove u-bolt hardware

Carefully lower axle enough to install lift block

Locate lift block on axle mount and raise to meet leaf spring

Install new longer u-bolts and install new hardware,

Slide ABS wire clip at frame to gain slack to avoid damage

Torque u-bolts with vehicle on ground and re-clip ABS wire

Note: slight taper on block, short end forward

Advertising