ReadyLIFT Ford F350 Super Duty 4WD, 2011-UP - 3.5F/3.0"R SST Lift Kit - For trucks with Dual Rear Wheels" User Manual

Page 3

Advertising
background image

www.ReadyLIFT.com

Phone (702)410-2300

Installation Steps (69-2011, 2511, 2511TP, 2531, 2535, 2537, 2538)

Place vehicle on level ground and measure ride height.

Remove upper trac bar hardware and disconnect at frame.

Lift front of vehicle and support with min. 3 ton jack stands.

Remove front wheels and tires.

(05-07) models remove brake line brackets at the frame

Install drop bracket and attach to frame with OE hardware.

(08-10) models require drilling new 3/8 hole below OE hole.

Shown, pass. side new 3/8 brake line hole location.

Drill 3/8 hole
and flatten tab

OE holes

Advertising