ReadyLIFT Ford F350 Super Duty SST Lift Kit: 2008-2010, 4WD Only - 2.5F/1.0"R" User Manual
Page 7
Note: Final torque of the new U-bolts should
be done with the vehicle on the ground and
to the proper specs. Make sure the u-bolts
have the equal amount of threads visible on
all (8). Take care to tighten the carrier drop
plate centered and aligned on the cross-
member. Recheck all work before and after
test drive.
www.ReadyLIFT.com
Phone (702)410-2300
Installation Instructions
(69-2515TP, 2516TP, 2517, 2518, 2524, 2525)
Raise Vehicle and support by frame. Support axle with jack.
Vehicles with ABS/TC remove clips from U-bolts.
Remove
U-bolt nuts and axle mounting plate.
Remove U-bolts and slowly lower axle to remove OE block.
Lower axle enough to install taller block, align and raise axle
Install longer U-bolts and nuts onto axle plate. Torque later.
With vehicle on the ground install carrier bearing drop plate.
Optional: If necessary