ReadyLIFT Nissan Frontier & Nissan Xterra SST Lift Kit: 2005-2013, 2WD & 4WD - 2.5F/1.5"R" User Manual
Page 4
www.ReadyLIFT.com
Phone (702)410-2300
Installation Instructions (69-4510)
Reattach lower shock mounting hardware. Raise
lower control arm and reconnect upper ball joint
to upper control arm. It will be necessary to use
a pry bar and some force; the upper control will
be contacting the frame when assembled at full
droop. Reattach sway bar endlinks and ABS line
brackets and tighten all hardware. This kit also
comes with alignment bolts and shows their in-
stallation in the following steps.
Remove upper strut mounting hardware
Remove strut assembly from vehicle
Attach strut extension with OE hardware
Drill 5/16 hole in upper control arm existing hole in as shown
Photo shows drilling hole
Attach bump stop as shown,
note bumpstop orientation
Reinstall strut assembly into vehicle w/ new upper hardware