ReadyLIFT GMC Sierra 2500HD 8-lug, 2011-2015, 2WD & 4WD - 2 Rear Block Kit" User Manual
Page 3
Advertising
www.ReadyLIFT.com
Phone (702)410-2300
Installation Instructions (66-3111, 66-3112)
Raise and support vehicle on level ground and support frame.
Release ABS clip from bracket on axle.
Support axle and remove U-bolt hardware and axle bracket
Remove U-bolts and lower axle to allow lift block positioning
Note
slight taper on block, shorter end towards front of truck
Raise axle aligning center pin and install new U-bolts/nuts.
Slide ABS wire clip at frame up to gain slack to avoid damage
Torque U-bolts with vehicle on ground and re-clip ABS wire
Advertising
This manual is related to the following products: