ReadyLIFT Toyota Tundra 2 Inch Rear Block Kit: 1999-2014, 2WD & 4WD - Manual (Page 4)

Raise vehicle securely by frame and support axle with jack..
Installation Instructions (66-5001 & 66-5002) **TUNDRA notes**
www.ReadyLIFT.com
Phone (702)410-2300
Raise axle and ensure locating pins are properly aligned. Place new lift block into position between axle and leaf pack.
Carefully lower axle and remove u-bolts Remove u-bolt nuts and lower plate.
Remove rear lower shock bolt and disconnect shock. Disconnect ABS wiring brackets from axle.
Work on one side at a time to prevent driveline damage.