ReadyLIFT Toyota Tundra, 2007-2014 - Heavy Duty Steering Kit User Manual
Page 4
Advertising
www.ReadyLIFT.com
Phone (702)410-2300
Installation Instructions (OFF-Road Series 38-XXXX Steering kits)
Loosen inner tie rod socket at the steering rack.
Remove entire inner/outer tie rod assembly.
Note: Vehicles requiring rack adapters, use thread locker
Clean rack threads and install & torque steering rack adapter.
Note: Use thread locking compound on clevis mounting bolt
Tighten to spec with clevis positioned as shown, (vertical)
Picture of assembled steering assembly
Insert reducer sleeve into sm. heim end and insert into clevis
Advertising
This manual is related to the following products: