Bill of materials – ReadyLIFT Ford Raptor 2010-2014 - Rear Hydraulic Bump Stop Kit User Manual
Page 3
www.ReadyLIFT.com - Phone: (800) 549-4620
Installation Instructions 25-2000
3
The Bill of Materials represents the component contents of this kit. All hardware is of the highest grade
and the components are manufactured to exacting specifications for a trouble free installation.
Use the attached torque specifications chart when final tightening of the nut and bolts are done.
Bill of Materials
Place the vehicle on level ground.
1.
Lift the vehicle supporting both frame and rear axle, then remove tires.
2.
While supporting the axle, remove the nuts from the u-bolts.
3.
Remove the plate from the u-bolts.
4.
Description Qty
Welded bump stop assy w/ cross member
1
1/2”-20 x 3” G8 bolt
2
1/2”-20 x 2.5” G8 bolt
2
1/2”–20 x 1.5” G8 bolt
4
3/8”-24 x 2.75” G8 bolt
4
1/2”-20 G8 Flag Nut Long
2
Description Qty
9/16”-18 x 7” G8 bolt
4
1/2” G8 washer SAE
8
3/8” G8 washer SAE
8
9/16” G8 washer AN style
8
1/2”-20 G8 Flag Nut Short
6
3/8” G8 C-lock Nut
4
9/16” G8 C-lock Nut
4
Requires the use of Fox Part # 980‐02‐801 2.5”x2.5” Bump Shock sold separately.