STI 1200A - Manual

Safety Technology International, Inc.
2306 Airport Road • Waterford, Michigan 48327-1209
Phone: 248-673-9898 • Fax: 248-673-1246
Toll Free: 800-888-4784 • E-mail: [email protected]
Web: www.sti-usa.com
Safety Technology International (Europe) Ltd.
Unit 49G Pipers Road • Park Farm Industrial Estate • Redditch
Worcestershire • B98 0HU • England • Tel: 44 (0) 1527 520 999
Fax: 44 (0) 1527 501 999 • Freephone: 0800 085 1678 (UK only)
E-mail: [email protected] • Web: www.sti-europe.com
INSTALLATION OF STI-1200A STOPPER II ® with “A” BACK BOX
All specifications and information shown were current as of publication and are subject to change without notice.
4 5 8 12 7
9
13
11
10
14
15
18 1 3 6 2
16
17
IMPORTANT NOTE: FOR WET OR WASHDOWN AREAS,
STI RECOMMENDS DRILLING (2) 1/8 in.(3mm)
DIAMETER WEEP HOLES IN THIS AREA TO PREVENT
THE BUILD-UP OF WATER INSIDE THE ENCLOSURE WHICH
MAY CAUSE DAMAGE TO ELECTRONIC COMPONENTS
19
AVIS IMPORTANT: DANS LE CAS DES ZONES HUMIDES OU
À APPLICATIONS SANITAIRES, STI RECOMMANDE LE
PERÇAGE DANS CES ZONES DE DEUX (2) BARBACANES
DE 1/8 PO (3 MM) DE DIAMÈTRE AFIN D’ÉVITER
L’ACCUMULATION D’EAU DANS LE BOÎTIER, CE QUI RISQUE
D’ENDOMMAGER LES COMPOSANTS ÉLECTRONIQUES
9.03 in.
(229mm)
8.41 in.
(213mm)
10.32 in.
(262mm)
9.89 in.
(251mm)
4.33 in.
(110mm)
6.37 in.
(162mm)
5.58 in.
(142mm)
7.62 in.
(194mm)
4.32 in.
(110mm)
2.72 in. (69mm)
4.49 in.
(114mm)
4.12 in.
(105mm)
A A
4 5 8 12 7
9
13
11
10
14
15
18 1 3 6 2
16
17
IMPORTANT NOTE: FOR WET OR WASHDOWN AREAS,
STI RECOMMENDS DRILLING (2) 1/8 in.(3mm)
DIAMETER WEEP HOLES IN THIS AREA TO PREVENT
THE BUILD-UP OF WATER INSIDE THE ENCLOSURE WHICH
MAY CAUSE DAMAGE TO ELECTRONIC COMPONENTS
19
AVIS IMPORTANT: DANS LE CAS DES ZONES HUMIDES OU
À APPLICATIONS SANITAIRES, STI RECOMMANDE LE
PERÇAGE DANS CES ZONES DE DEUX (2) BARBACANES
DE 1/8 PO (3 MM) DE DIAMÈTRE AFIN D’ÉVITER
L’ACCUMULATION D’EAU DANS LE BOÎTIER, CE QUI RISQUE
D’ENDOMMAGER LES COMPOSANTS ÉLECTRONIQUES
9.03 in.
(229mm)
8.41 in.
(213mm)
10.32 in.
(262mm)
9.89 in.
(251mm)
4.33 in.
(110mm)
6.37 in.
(162mm)
5.58 in.
(142mm)
7.62 in.
(194mm)
4.32 in.
(110mm)
2.72 in. (69mm)
4.49 in.
(114mm)
4.12 in.
(105mm)
A A
4 5 8 12 7
9
13
11
10
14
15
18 1 3 6 2
16
17
IMPORTANT NOTE: FOR WET OR WASHDOWN AREAS,
STI RECOMMENDS DRILLING (2) 1/8 in.(3mm)
DIAMETER WEEP HOLES IN THIS AREA TO PREVENT
THE BUILD-UP OF WATER INSIDE THE ENCLOSURE WHICH
MAY CAUSE DAMAGE TO ELECTRONIC COMPONENTS
19
AVIS IMPORTANT: DANS LE CAS DES ZONES HUMIDES OU
À APPLICATIONS SANITAIRES, STI RECOMMANDE LE
PERÇAGE DANS CES ZONES DE DEUX (2) BARBACANES
DE 1/8 PO (3 MM) DE DIAMÈTRE AFIN D’ÉVITER
L’ACCUMULATION D’EAU DANS LE BOÎTIER, CE QUI RISQUE
D’ENDOMMAGER LES COMPOSANTS ÉLECTRONIQUES
9.03 in.
(229mm)
8.41 in.
(213mm)
10.32 in.
(262mm)
9.89 in.
(251mm)
4.33 in.
(110mm)
6.37 in.
(162mm)
5.58 in.
(142mm)
7.62 in.
(194mm)
4.32 in.
(110mm)
2.72 in. (69mm)
4.49 in.
(114mm)
4.12 in.
(105mm)
A A
CLEANING INSTRUCTIONS
1. Rinse cover with water to remove abrasive dust and dirt.
2. Wash with soap or mild detergent using a soft cloth. (DO
NOT SCRUB.)
3. Rinse once more, then dry with a soft cloth or chamois.
4. To remove grease or wet paint, rub gently with a cloth
wetted thoroughly with naphtha, then wash and rinse.
(DO NOT USE RAZOR BLADES.)
INSTALLATION INSTRUCTIONS
1. Insert the (4) 06297T mounting tabs into the back box slots.
2. Using the back box as a template, place against the mounting surface and mark the location for the mounting
screws.
3. Drill (4) 1/4 in.(6.3mm) diameter holes.
4. Insert the (4) plastic anchors provided into the wall.
5. Mount the back box to the wall using the (4) #10 x 1-1/2 in. screws.
6. Connect conduit and pull wire into the back box.
7. Mount the cover assembly to the back box using (4) #8-32 x 3/4 in. socket head screws and (4) #8 flat washers.
8. Lift the cover and pull wires through the cutout of the mounting plate and attach them to the device to be mounted.
9. Mount the device using the (2) #6 x 5/8 in. tapping screws.
10. Close the cover by aligning the (2) tabs on the top of the mounting plate and rotate the cover down to close.
Electronic warranty form at www.sti-usa.com/wc14
1200AIS MAY07
PART NUMBER
1 6297101-M2 06297 SERIES BACKBOX COVER MACHINED TO SPEC. 1
2 629761A NEOPRENE GASKET FOR 06297 SERIES BACKBOX 1
3 06297T WALL MOUNT TAB 4
4 SUB-51 05101 HORN HOUSING WITH “IN CASE OF FIRE...” LABEL 1
5 SUB-50 01002 BUBBLE COVER WITH “LIFT HERE” LABEL 1
6 06297A-M1 “A” BACKBOX WITH (1) CONDUIT HUB HOLE 1
7 18021 3/4 in. NPT NEMA 4X CONDUIT HUB 1
8 19100 #8-32 x 5/8 in. BUTTON HEAD SCREW WITH SEALING WASHER 1
9 19008 #8 U-TYPE NUT 1
10 19011 #8-32 x 1/2 in. TRUSS HEAD TAMPER SCREW 2
11 18056 SOLDERLESS WIRE CRIMP CONNECTOR WITH EYE LOOP 2
12 19055 #8-32 KEPS HEX NUT 2
13 SUB-05-M1 LANYARD 1
14 19050 #8-32 x 3/4 in. SOCKET HEAD CAP SCREW 4
15 19049 #8 FLAT WASHER 4
16 19013 #10 x 1-1/2 in. PHIL PAN HEAD SCREW 4
17 19033 #10-12 PLASTIC ANCHOR 4
18 19068 #6 x 5/8 PHIL PAN HEAD HILO TAPPING SCREW 2
19 629763 1/2 in. BACKBOX TAB SPACER 4
ITEM DESCRIPTION QTY