STI SS-2108EX User Manual

Page 2

Advertising
background image

This push button has been tested according to UL38 and UL2017. Manual fire
alarm stations are listed in UL category UNIU and non-fire alarm initiating devices
are listed in UL category UEHX. It is important to read, understand and follow all
instructions provided with this product. It is the installer’s responsibility to
comply with NFPA72 and 101, NEC, mounting specifications according to ADA
and other applicable fire and electrical codes. After installation and testing are
complete, provide a copy of this manual to all personnel responsible for testing
and maintenance of this product. To avoid electrical shock, DO NOT attempt to
install this product when power is on.

* For access control installations, power for the SS-2008 must be supplied by a
power source Listed to UL294. When used for access control, this device shall be
used as a part of an access controlled egress door system. It is up to the local
AHJ to allow use of this device in place of an automatic sensor. For higher
security installations, lower time limits should be used.

- 1 -

Advertising
This manual is related to the following products: