Anthro Steve’s Station Office Assembly Instructions - Manual (Page 4)

*300-5552-00*
300-5552-00
Anthro Corporation ® | 10450 SW Manhasset Dr. | Tualatin, OR 97062
Toll-free: 800.325.3841 | Fax: 800.325.0045 | email: [email protected] | anthro.com
Outside the U.S. | Tel: 503.691.2556 | Fax: 503.691.2409
warranty:
Steve's Station has a Lifetime Warranty against
manufacturing on the table; two-year warranty
on legs and electrical system. Cords and plugs
are not warranted.
notices:
Technology Furniture and Steve's Station are
trademarks of Anthro Corporation.
Anthro reserves the right to modify the design
and specifications without prior notice.
steP 4
test tHe tAble
ƒ Make sure the table is plugged in and connections to the control box are secure.
ƒ Test the Safety Stops. Locate the float plates on the left and right sides of the
table where the legs meet the worksurface.
ƒ Move the legs down. While they're moving, press one float plate. The table
should stop moving down and move up 2”. Repeat for the other float plate.
conGrAtulAtions! your steVe's stAtion instAllAtion is comPlete!