Boltek LD-350 - Manual (Page 18)

U S B C O M M A N D S A N D M E S S A G E S
13
USB Commands and Messages
Commands
KA<cr> : keeps USB connection alive
VER<cr> : query firmware version
RESET<cr> : resets LD-350
FT<cr> : sends a forced trigger signal to LD-350
RAW<cr> : query raw data state
RAW <0,1><cr> : disable (0) or enable (1) raw data to be sent through USB
SQ<cr> : query squelch level
SQ<value 0-100><cr> : set squelch level
CAD<cr> : query close alarm distance
CAD<distance 0-250><cr> : set close alarm distance
CAT<cr> : query close alarm time
CAT<distance 0-250><cr> : set close alarm time
SAR<cr> : query severe alarm rate
SAR<0-999><cr> : set severe alarm rate
SAT<cr> : query severe alarm rate
SAT<0-999><cr> : set severe alarm rate
SAVE<cr> : saves current configuration to LD-350
READ<cr> : reads current LD-350 configuration
Appendix A