ADC ProPatch Programmable Series - Manual (Page 11)

5/08
•
104974AE
Pr
oPatch
®
Pr
ogrammable
Series
11 w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1
ProPatch ® Programmable Series
Accessories
Individual longframe and bantam plugs are available featuring low capacitance injection-molded
insulators and precision-machined brass or nickel-plated conductors for smooth insertion and best signal
performance. Wire connections are made via miniature screw terminals. These plugs provide the best fit
and performance to match ADC patch panels.
Description Color Catalog Number
Three-Conductor Longframe Plugs (field installable)
Single Red PJ051R
Single Black PJ051B
Single, nickel-plated Black PJ051B-MN
Looping Plugs – internal connections tie together corresponding tip,
ring and sleeve conductors to allow looping of jack circuits Black PJ4
Hole Plugs – for longframe panels to fill unused jack positions Black PJ29
O r d e r i n g I n f o r m a t i o n
Description Color Catalog Number
Three-Conductor Bantam Plugs
Single plug; attachable plug; two lugs, shell mounting
screw and two lug attachment screws supplied Red PJ777R
Black PJ777B
Dual plug; attachable plug; four lugs, two shell mounting
screws and four lug attachment screws supplied Black PJ778B
Looping Plugs – Used to “loop” or patch adjacent jack circuits;
plug conductors strapped internally; wired tip to tip, ring to ring
and sleeve to sleeve Black PJ746
Hole Plugs – For bantam panels to fill unused jack positions Red PJ729R
Black PJ729B
Single Bantam Circuit Guard Plugs – To identify or block entry
to critical circuits; does not actuate circuit Red PJ925R
White PJ925W
Black PJ925B
Longframe Audio Plugs
Bantam Audio Plugs
O r d e r i n g I n f o r m a t i o n