Brocade FastIron WS Hardware Installation Guide - Manual (Page 56)

46 Brocade FastIron WS Hardware Installation Guide
53-1002498-02
Cabling a fiber optic module
4
NOTE
The bail latch may be attached to either the top or the bottom of the mini-GBIC.
4. Grasping the bail latch, pull the fiber optic module out of the port.
5. Store the fiber optic module in a safe, static-free place or in an anti-static bag.
6. Install a new fiber optic module in the port. For information about performing this task, refer to
“Installing a new fiber optic module” .
Installing a new fiber optic module
For instruction on installing a fiber optic module refer to “Installing a fiber optic module” on
page 35.
Cabling a fiber optic module
For instruction on cabling a fiber optic module refer to “Cabling a fiber optic module” on page 36.
Cleaning the fiber-optic connectors
For instruction on cleaning a fiber optic module refer to “Cleaning the fiber-optic connectors” on
page 37.