Brocade Fabric OS Encryption Administrator’s Guide Supporting Key Management Interoperability Protocol (KMIP) Key-Compliant Environments (Supporting Fabric OS v7.1.0) - Manual (Page 64)

46 Fabric OS Encryption Administrator’s Guide (KMIP)
53-1002747-02
Steps for connecting to a KMIP appliance (SafeNet KeySecure)
2
Configuring the KMIP server
1. From the KeySecure Management Console, select the Device tab, then select Device
Configuration > Key Server > Key Server.
The Cryptographic Key Server Configuration page displays ( Figure 36 ).
FIGURE 36 KeySecure Cryptographic Key Server Configuration page
2. Under Cryptographic Key Server Settings, select KMIP as the protocol.
3. Ensure that the Use SSL check box is selected.
4. Click Edit to open a dialog box for changing IP, Port, and Server Certificate settings.
5. After changing/adding your settings, save your settings.
You are returned to the Cryptographic Key Server Configuration page. The settings are
displayed in the table.