Brocade Web Tools Administrators Guide (Supporting Fabric OS v7.3.0) - Manual (Page 35)

The default path for Windows is C:\Documents and Settings\<<user>>\Webtools\<log file>.
The default path for Linux is /root/WebTools/<switch log file>.
3. Click Capture to start collecting the SupportSave logs.
A zipped-up SupportSave folder is saved in the defined location. SupportSave zip file name format is
"WT-SS-switchIP-FID-dd-mm-yy-hh-mm-ss". The SupportSave file name will show the VF ID if VF is
enabled on the switch.
NOTE
SupportSave collection is terminated if the time exceeds 20 minutes.
Requirements for IPv6 support
The following list provides requirements for Web Tools IPv6 support:
• In a pure IPv6 environment, you must configure your DNS maps to the IPv6 address of the switch.
• The switch name is required to match the DNS name that is mapped to the IPv6 address.
• If both IPv4 and IPv6 addresses are configured, Web Tools can be launched using any configured IP
address.
Requirements for IPv6 support
Web Tools Administrator's Guide 35
53-1003169-01