Brocade Network Advisor SMI Agent Developers Guide v12.3.0 - Manual (Page 110)

94 Brocade Network Advisor SMI Agent Developer’s Guide
53-1003159-01
Brocade Access Gateway and NPIV
3
AG connected to a single fabric
FIGURE 47 AG mapping
HBA with virtualized ports connected to AG
Figure 48 represents the Brocade Network Advisor SMI Agent model for discovery of a host
attached to AG.
• The instance of Brocade_Platform with Dedicated property values as Not dedicated represents
the HBA attached to the AG. This platform instance is shown if the HBA is FDMI-enabled and
the host name is known to Network Advisor. For more details, refer to the
“FC HBA profile” on
page 50.
• If the value of Dedicated property is Gateway of Brocade_AccessGateway, then it represents
the AG.
• The association between the SANProtocolEndPoint of switch and AGSANProtocolEndPoint of
AG is Brocade_AGSANActiveConnection. The association between AGSANProtocolEndPoint of
AG and SANProtocolEndPoint of the end device (host) is Brocade_AGSANActiveConnection. The
two associations create a direct association between the SANProtocolEndPoint of the switch
and the SANProtocolEndPoint of the end device (host).
• The SANProtocolEndPoint of the switch is associated with the F_Ports of AG, by
Brocade_AGSANProtocolEndPointLogicalIdentity. The F_Port of AG is internally mapped to
N_Ports of AG, which is connected to the switch.
F1
HBA2
HBA1
HBA3
N2
N1 F1
Switch 1 AG
F2
F2 n2
n1
n3
F3