Brocade Network Advisor Software Licensing Guide (Supporting Network Advisor 12.3.0) - Manual (Page 14)

xiv Brocade Network Advisor Software Licensing Guide
53-1003219-02
1. The Management application cannot discover or manage wireless access points running
Mobility 5.1.
Network OS hardware and software support
Network Advisor supports the Network OS 3.0.0 firmware platform. For platform-specific firmware
requirements, if any, refer to
Table 3 .
Table 3 lists the hardware platforms supported by this release of Network Advisor , the terminology
used in the documentation, as well as any specific firmware requirements.
NetIron MLXe
(Supported regardless of license
configuration) Ethernet Core router NetIron 5.0.0 or 5.0.1
NetIron XMR
(Supported regardless of license
configuration) Ethernet Backbone router NetIron 5.0.0 or 5.0.1
NetIron CES 2048CX (NI-CES-2048CX-AC)
(Supported regardless of license
configuration) Ethernet Carrier router NetIron 5.0.0 or 5.0.1
NetIron CER
(Supported regardless of license
configuration) Ethernet Edge router NetIron 5.0.0 or 5.0.1
NetIron XMR/MLX 2-Port 100Gbe Module 2-Port 100Gbe Module NetIron 5.7.0
NetIron XMR/MLX 20-port 10GbE Module 20-port 10GbE Module NetIron 5.7.0
ServerIron family Application product
ServerIron ADX 1000 Application switch
ServerIron ADX 1000F Application Fiber switch ADX 12.3.03 or later
ServerIron ADX 4000 4U Application Delivery chassis ADX 12.1.00 or later
ServerIron ADX 10000 10U Application Delivery chassis ADX 12.1.00 or later
TurboIron Family Data Center switch 4.1.00d or 4.2.00 or later
TurboIron 24X (T1-24X-AC) Data Center switch 4.1.00d or 4.2.00 or later
Brocade 6650 Switch Data Center switch FastIron 7.5 and later
Brocade 6650 Base L3 Router Data Center base L3 router FastIron 7.5 and later
Brocade 6650 Router Data Center router FastIron 7.5 and later
TABLE 2 IronWare OS-supported hardware (Continued)
Device name Terminology used in documentation Firmware level required
TABLE 3 Network OS-supported hardware
Device name Terminology used in documentation Firmware level required
Brocade VDX 2730 10 Gbps connection blade VDX 2730 10 Gbps connection blade 2.1.1_fuj
Brocade VDX 2740 switch VDX 2740 switch 4.0.0_bbd
Brocade VDX 6710 switch VDX 6710 switch 2.1 or later
Brocade VDX 6720-24 switch VDX 6720-24 switch 2.1 or later