Brocade Virtual ADX Global Server Load Balancing Guide (Supporting ADX v03.1.00) - Manual (Page 188)

178 Brocade Virtual ADX Global Server Load Balancing Guide
53-1003245-01
Displaying GSLB for IPv6 configurations
2
Displaying IPv6 optimization information
Use the show native-ipv6 feature command to display whether GSLB IPv6 optimization and the
optimized SLB IPv6 path are enabled on the Brocade Virtual ADX .
Syntax: show native-ipv6 feature
Table 21 provides descriptions of the highlighted fields in the sample output for show native-ipv6
feature command.
TABLE 21 GSLB IPv6 optimization and optimized IPv6 path information
Field Description
GSLB IPv6 OPT Indicates whether GSLB allows the optimized IPv6 path to continue
processing SLB and SSL packets:
•
ON indicates that the GSLB allows the use of the optimized IPv6
path.
•
OFF indicates that GSLB does not allow the use of the optimized
IPv6 path.
native_ipv6_enabled Indicates whether the optimized IPv6 path for SLB IPv6 traffic is enabled
on the Brocade Virtual ADX:
•
ON indicates that the optimized IPv6 path is enabled.
•
OFF indicates that the optimized IPv6 path is disabled.
Virtual ADX#show native-ipv6 feature
NAT64 : OFF
Static IPv6 NAT : OFF
V6 Stateless : OFF
664 Binding : OFF
446 Binding : OFF
IPv6 Flow Based ACLs: OFF
Client Max Conn : OFF
Force Source NAT : OFF
TCS : OFF
Flow_mgmt : OFF
GSLB : OFF
GSLB IPv6 OPT : ON
SYN-Defense : OFF
SIP : OFF
PBR : OFF
native_ipv6_enabled : ON
Internal TCAM for IP: OFF